Understanding Audio Interfaces (DACs, Bit Depth, Sampling Rate, Analog vs Digital)

March 15, 2012 § Leave a comment

What is a Digital Audio Interface?

If you use your computer for music, DJing or audio creation, you’ve probably encountered digital audio interfaces. The digital audio interface translates binary information into audible information so you can hear it. And it can take audible information and translate that into binary information for the computer to process. Most computers come with a digital audio interface built-in (this is what allows you to hear iTunes play music instead of noise.) But the quality of those devices are limited as most consumers are more interested in the screen size rather than the sound quality. At some point most sound enthusiasts find themselves on a path to finding a Digital Audio Interface for their computer to raise the quality level of the sound playback, to record outside sources, or to expand routing options for their studio.

A good audio interface is essential to producers for reference and for recording because most stock sound cards will not give you professional sound. Audio interfaces can also greatly expand the possibilities of your recording setup with multiple inputs and outputs, MIDI connection and monitoring options. The options available are sometimes overwhelming so earlier this year on our blog we explored some of the devices available on the market by Apogee, Focurrite and Native Instruments. That article can be helpful if you’re looking for details on specific devices. In this article we want to address some of the variables involved in converting sound to digital information so that you can be informed for your studio’s development and educated for your future audio interface purchases.

Analog vs Digital Audio

You’ve most likely encountered conversations regarding analog vs digital sound (vinyl vs MP3, for instance) –  it’s a widely debated topic online and amongst music and audio enthusiasts. But just what is the difference between these signal paths and what makes the sound different? You probably understand that your CD player, iPod and computer are digital audio devices and record players are analog audio devices. But it’s important to understand how digital audio works on the inside of these devices so that you can make a proper choice on your digital audio equipment.

An analog signal, by definition, is A nominally continuous electrical signal that varies in amplitude or frequency in response to changes in sound, light, heat, position, or pressure. Analog can be electrical or mechanical but the key word here is “continuous.” An analog signal path implies a continuous signal in contrast to a digital signal path, which breaks everything into numbers. This is the primary difference between analog and digital sound.

Until the mid 1980’s almost all audio recording devices were analog. That is to say they all used a mechanical or electrical recording methods to capture a continuous waveform. Around this time digital recording started to become affordable and eventually it became the most cost effective way to create music – which is why so many of us use digital devices to create sound today.

DAC – Digital to Analog Converter

A Digital to Analog Converter (DAC) is something that most of us take for granted. There’s one in your satellite TV box, one in your CD Player and one in your computer. This device is the heart of your hearing experience with all forms of digital audio. When it comes to professional audio we want to use a high quality DAC to create a better, cleaner and sometimes more enjoyable experience. When recording audio into your computer the Ananlog to Digital Converter (ADC) is the soul of your recording experience. This is what turns your guitar or voice into binary data to be used by the computer.

Digital to Analog converters are manufactured almost exclusively on integrated circuits (microchips) and the best ones are created by a few companies who specialize in this type of chip architecture. Therefore many audio interfaces share the same  DAC circuits (Cirrus Logic chips show up in many devices.) There are many kinds of DAC circuits, however, and the industry is constantly trying to create better chips.

Bit Depth / Resolution

The waveform above represents an analog signal/sample (grey) and a digital signal/sample (red.) Notice that the analog signal is a smooth curve, whereas the digital signal is broken into a grid-like shape. While this grid is not entirely accurate (it’s more for the sake of example), it helps to illustrate the idea of “bit depth.” Bit depth describes the number of bits of information recorded for each sampleWhen you read “16 bit” or “24 bit,” the bits represent the resolution – how many dots will help create that nice curve of the waveform. The less dots, or bits, the more grid-like your wave will be and the more “grainy” the reproduction of sound will be. The more bits, the more accurate the curve and therefore more accurate sound. 16 bit is the standard resolution for CDs and is generally acceptable for analog to digital recording. 24 bit will give you a cleaner sound and more accurate representation of the curve. Some systems go even higher than this but understand that with more bit depth you will be pushing your processor to work harder.

Sampling Rate

Bit depth and sampling rate determine the quality or accuracy of a digital recording. While bit depth is sort of easy to explain, Sampling Rate is a bit more tricky. Sampling rate defines the number of samples per unit of time (usually seconds) taken from a continuous signal to make a discrete signal. For time related signals the unit for sampling rate is Hertz. Perfect reconstruction of a signal is possible when the sampling frequency is greater than twice the maximum frequency of the signal being sampled, or equivalently, when the Nyquist frequency (half the sample rate) exceeds the highest frequency of the signal being sampled. In practice this means that the a minimum sampling rate of 40kHz should allow for accurate reproduction of 20Hz – 20,000kHz – the range of human hearing. This was initially the standard for digital audio recording until it was realized that human beings can actually perceive sounds above and below that range. For this reason you now find interfaces that record at 48kHz and higher. (Read more)


Tagged: , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

What’s this?

You are currently reading Understanding Audio Interfaces (DACs, Bit Depth, Sampling Rate, Analog vs Digital) at Sounds Defy Gravity.


%d bloggers like this: